Step-1 Required Things
Step-1 Remove the plug cover by either "snapping" or unscrewing it.
Step-2 Cut the electric wire.
Step-4 Gently twist the strands of copper wire with your fingers until each
strand is tight. Fold over the twisted strands.
Step-5 Insert the twisted copper wires into the holes.
Step-6 Tighten the little screw on each of the plug's pins.and make sure the
electrical cord is firmly gripped by the arrestor clips.
Step-7 Finally screw the electric plug
Step-7 Electric plug is ready.
For more details watch this video